When you use the microwave, it ‘s hard to avoid the damage. You need to know the standard errors in the microwave. You need to know the cause, the reason, why and how to fix it, then this will help you in using the equipment correctly. If the microwave has severely damaged, then you should call the repairman. The following article will guide you how to fix the microwave for simple errors.
#1. Function Keys Do Not Work
During use, you have pressed the function button. This will strongly affect electricity. If the circuit is broken, the control panel will be damaged and not receive. This will influence the cooking housewife.
The control panel was broken, then you only need to replace it. But from experience, you should use the plastic panel. Because it will be cheaper and long shelf life. The market has many different types of board. Therefore, you will be tough to buy the appropriate panel, if you do not have the technical knowledge.
If you find that control panel is wet, moldy, it is because you have not properly cleaned. Also, the microwave is the appropriate environment for the development of insects (especially cockroaches). The insects will gnaw and undermine the function button, and they are the cause of crippled control panel. Therefore, you should clean the function keys frequently. Always take the time to wipe the dirt after each use, or used again after a long time.
#2. Microwave Is Still Active but No Bot Food
If you hear the humming sound unusual, the electronic module has been corrupted. This error is not easily overcome, and you need to contact the reputable repair unit. The cost to fix this depends on the extent of the damage.
#3. The Burn Marks Inside The Microwave
Cause: If you use these kinds of bowls, dishes made of metal (or sparkling patterns), then this will be very dangerous. The waves will be deflected move by metal items. This creates the sunspots inside a microwave.
Explaining the problem: The collision between the spark and the surface in the microwave will make the burn marks. The pieces of food will be heated after a long time using a microwave, and this causes the unpleasant smell. If you use the food is removed from the microwave, then we will have the unpleasant smell. This will affect the attractiveness of the other dishes of the meal. If the enamel of the microwave is broken, then this is the most severely damaged. This will create burn marks inside the microwave. You will not be able to fix this damage, and you are required to purchase a new microwave. If you still use an old microwave, food will not be delicious and can cause other hazards during use.
Workaround: Regularly check and sanitation microwave. Call reputable repairman to check machine status periodically. When cleaning your microwave, use a small piece of cloth to clean all food debris inside the microwave. If you find it clean, you can use a bit of water to the cleaning easier.
#4. Seeing The Bright Sparks in The Microwave
Some of the main causes leading to this problem include: food scraps, food casings, cooking utensils made of metal, kitchen utensils are decorated with the glittering pattern. These will create sparks in microwave inside.
To fix this situation, you should stop using the oven immediately. If you continue to use the microwave will rot quickly, reduced ability to cook. You should use white or glass dishes when cooking in the microwave. You should make sure to use these tools not made of metal or aluminum. Therefore, you need to clean the microwave frequently. You should replace the type of food casings. Note! You just kind of casings used by the manufacturer recommended for microwave use, and you do not use metal cooking utensils. If the oven enamel was peeling, you need to repaint. If you have difficulty in this matter, we can contact reputable repair unit.
#5. The Control Panel Does Not Work or Works Incorrectly
The control panel does not operate, or incorrect work may be due to a wet board, need a few days to dry. Note avoid spraying water directly on the control panel. You use a towel and dry around the controller.
If the control panel is not wet, then you check the presence of insects or not. Insects, especially cockroaches, they enjoy warmth of the circuit board. Therefore, you should attach a mesh in air vents. This helps prevent cockroaches get into the microwave. You should limit the occurrence of insects (especially cockroaches). They will nest in microwave through air vents.
#6. Microwave Did Not Work
- Fuse: Fuse (also known as the high-voltage fuse) is a safety device to cut off the power if the voltage rises too strong, to protect the microwave. The first thing you should do when the microwave does not work is to check the microwave fuse. If you find it necessary, please replace a new fuse. Currently, the value of the fuse is cheap.
- Door switch (glass door of the microwave has attached a power switch): If the door switch is failed, then this also makes the microwave does not work. You check the door switch. If it was broken, you should replace it.
#7. Microwave Disc Does Not Rotate
This problem involves rotating axis and rotation. Be sure to check the following three ways:
- You check coupling plastic below the tray.
- Check the location of the rotation and rollers: If they are skewed, or trapped, then you should reset. The cause is due to the prolonged activity and dirt.
- Check the disc was in the right position on the rotational axis or not. If the motor shaft is damaged, you should call the repairman.