Blender is a household electrical appliance, and it is shared and necessary for every family. Equipment is a useful tool for processing food. You will create a delicious and nutritious smoothie, and just prepared of various foods such as meat, fish, coffee, spices/herbs, nuts.
The use of a blender is not too complicated, but it is not easy. You will not be used correctly without knowledge. You’ll see the standard errors during the utilization of the device. However, depending on the type of machines they have used the most logical way. This makes it possible to minimize the incident occurred. Here are 9 common fundamental errors when using a blender and how to fix it.
#1. Do Not Pull The Plug After Using
After grinding food, sometimes you busy for cooking or other matters and forget not pull the plug after use. Or sometimes you check the machine, and you have to power socket. In this case, when you accidentally hit the start button, the machine will be broken, and much dangerous happens.
So as soon as finished, you pull the plug, take the bowl. Then you rotate in a clockwise direction to remove the bottom of the bowl, and this will ensure your safety. You have to be careful with the blade during operation and hygiene.
#2. Do Not Check The Blender Before Using
When you need to use a blender, you usually give food to the machine without checking the accuracy of the parts. You need to care about the exact location of the parts, and please pay attention if strange objects were appearing in a mortar. This helps you avoid breaking the plastic shell or machine is not working, or a burnt. It is best to check before using the device.
#3. Blender Operating Continuously
When used, you should let it rest for a few minutes then used to, especially when the engine gets hot. For the hand-held blender, using just: Click … Drop …Click … Drop (avoid pressing too long will cause the machine is overloaded, and ignition motor). Depending on the amount of food, grinding time from 5 seconds – 15 seconds per Click … Drop. For models with many powerful machines speed (15 speed), you should adjust the rate of the average position (6 or 7) to avoid is overloaded the machine. This is an inflammable motor.
#4. Grinding Too Much and Not Chopped Material
When preparing materials to grind, you often leave food without chopped. You give a lot of food at the same time. When using the machine to grind porridge, soup. If you use vegetables, and you do not truncate the vegetables, then this easy to make grinding shaft being overloaded. And the motor will burn.
Before grinding, you should see the level of use of the machine, and you should use the food less than the permitted level. Food must be chopped, sorted and milled at a moderate volume.
#5. Do Not Clean The Blender Immediately After Using
Once you grind food, many people have a habit of not washing equipment. However, the habit will inadvertently create an environment for microbes. The bacteria come from vegetables, fruits, and other foods. You will be hard when cleaning device after an extended period using. Immediately after finishing a food processor, you should pour water to soak and clean the machine after that to ensure hygiene.
#6. The Amount of Fluid Used Is Not Reasonable
Blender will dilute the mixture at about 40%. Therefore, you should note that the using of water for milling mixture. Ideally, you should only add water phase is nearing completion. This will not be too dilute mixture and loss of appetite.
The amount of liquid will affect the whole process of grinding (uniformity and taste). If too little of the fluid, the smoothies will not be smooth. If too little of the liquid, the mixture will be diluted. You need to add water or cream and milk to increase efficiency and extend the life of the machine.
#7. Grinding Many Materials at The Same Time
You often mixed in the blender at the same time, and you think there will be a smooth mixture. But that is wrong. Blender will not be able to grind all the different ingredients. The many grinding materials at the same time is the fundamental cause leading to the damage. Even this will cause the blade bent, broken. And the material does not reach the necessary softness.
The best way is that you should shredded material, and give each material in turn on the machine. Also, you should grind hard materials prior, and use the correct blade as instructed. Water or ice cubes should be put in finally, to quantify the appropriate water level.
#8. Abusing of Other Functions
A blender can undertake many different roles. You can use it to grind juice, squeezed oranges, beat eggs. Since each machine is equipped with various types of blades, each of which will have its function. Sometimes, if you overdo the unique features to grind many kinds of food. This will affect the reliability of the machine. You should use a hand-held blender for each purpose. This will ensure hygiene and prevent contamination when preparing food.
#9. Cleaning Device Improperly
How to clean the machine also affects the reliability of the blender. When cleaning the product, you use the appropriate cleaners or corrosive liquids. After you have washed your device, you do not dry the machine, the machine has an unpleasant smell and is damaged quickly.
To fix this problem when you clean, you should clean and wash mortar, mortar lid. You should wash under the tap powerful device to clean the scum. Soak and clean blades, funnel with a soft brush. You should not use boiling water and store in the refrigerator. Since the plastic material is very susceptible to cracking. Do not forget to dry device after cleaning with water.
Here are common errors when using a blender and how to fix it. Wish you always have the smoothie, delicious dishes while ensuring safety, ensure the longevity of the machine.