Many homemakers often make mistakes using an electromagnetic stove. This makes the use of the kitchen becomes challenging, and the cooking process is interrupted. Many homemakers still do not know the meaning of the error code. The electromagnetic stove is one convenient kitchen appliances, and it enables you to cook delicious food for the family. But you will encounter a lot of trouble if you do not know how to use this equipment properly.
The article will list the top 9 standard errors electromagnetic stove when in use. And the article also makes fixing mistakes, which helps users do not need to worry when using equipment or the process becomes convenient. Beside from the electromagnetic cooker, pressure cooker, oven as well as the convenience of kitchen equipment to help the cooking process becomes a lot easier. You can refer to other cooking devices to have more options.
1. Error Code E0 – Inappropriate Using Pot or Pot Size Is Too Small
If you use this type of pot does not fit, or the diameter of the bottom of the pot is smaller than a half round from the electromagnetic stove, the electromagnetic stove will not work and emit signals E0. How to fix it very simple. You should use a new pot, and the pot is suitable for your electromagnetic stove. Thus, when you buy the pot, you remember to notice the suitable for an electromagnetic stove. You observe the size of the bottom of the pot or ask the advice of the salesperson. You’ll avoid this situation and use pot.
2. Error Code E1 – Electromagnetic Stove Is Overheating
The electromagnetic stove was cooking for a long time with a large capacity. This causes the cooling fan does not keep the whole electromagnetic stove. And as a result, thermal sensor system will issue a warning and automatically turn off the electromagnetic stove. This is one of the common mistakes when using the electromagnetic stove. In this case, you should immediately shut down the heat, but do not withdraw power source to keep the fans continue to work. Take the pot off the stove and if you can use electric fans outside. This will reduce the temperature of the stove. And when the temperature has dropped, you can continue to use.
Therefore, you can choose the products with the best quality to use. You should refer to these categories, which it was consumed widely. And do not forget to compare the need to use and the reasonable price.
3. Error Code E2 – Using a Large Amount of Electricity
This case is very rarely seen. This error can occur due to power network you are using. The power grid is unstable, and the voltage is higher than normal, so the power sensor will automatically disconnect power and report an error. So in the family, you should not lack voltage stabilizers.
4. Error Code E3 – Power Supply Is Too Weak
During rush hours, demand for more electricity use is the cause of the power shortages of equipment. Also, you far can the power station. Therefore, the voltage regulator is also essential in these cases.
You can choose the products with compact design, convenience. And the device is made of high-grade tempered glass, durable. This will minimize damage and danger if occurred the unfortunate incident.
5. Error Code E4 (The Beep Interrupted) – Overloaded Power or Excessive Heat
This is one of the common mistakes when using the electromagnetic stove. The temperature will be overwhelmed when heat level is using higher than the permitted level of the electromagnetic stove. How to resolve in this case is that you turn off the electromagnetic stove. You use the fan a period of 30 minutes, and you wait until the stove cools down. Then you continue to use.
6. Error Code E5 – Sensor (IGBT) of The Electromagnetic Stove Is Overheating
This is a common error when using cooking by an electromagnetic stove. The high cooking temperature will cause overheating of the sensor. And you need to turn off the stove and let cool completely. Then you continue to use.
7. Error Code E6 (beep folding) – Thermal Sensor Have Problems or The Temperature in The Pot Bottom Is Too High
This error occurs due to sensor problems as loose, disabled. Additionally, this error can occur due to the overheat of pot bottom. How to fix it very simple. You turn off the stove and wait for cold, waiting for the ventilation of kitchens around. You must wait until cool down, and then you can use it again. If the sensor had been burnt, replace a new sensor. And you can continue to use regularly.
8. Error Code EF – The Wet Surface
This error is making a slippery surface, so the electromagnetic stove can not heat the pot to cook food. So you pick up the pot down and wipe dry stove and bottom of the pot to be able to continue to use.
9. Error Code AD – Too Hot Pot or Pot Bottom Not Flat
AD error comes from two cases:
1 / There are obstacles between the pot bottom and stovetop. Therefore, if you think there are obstacles, you remove it and clean the kitchen surfaces and pot bottom.
2 / The pot bottom is not flat, and this will making the base is not exposed to the stove. How to resolve is that you use the suitable new pot.
If you turn off the electromagnetic stove suddenly, then you should wait for the fan stops. Then you activate the stove to avoid the sudden operation. Also, not everyone knows how to clean the equipment, and the stains quickly and efficiently. Therefore, you need to learn how to clean the appliance correctly, and you should do it regularly.
When you apply the treatment in the article, but the device is still error. The best way is you go to the service center to receive counseling, repair correctly.